SPESIALIST TESTING

Oil Institut provides a comprehensive skill set for egineering graduates seeking employment in the global oil and gas industry.

 

ASNT CERTIFIED

TRAINING RADIOGRAPHY

This course is designed for manufactures, service organizations and overhaul agencies that require their technicians or engineers to be trained in the application of Radiography techniques.

The course covers both X and Gamma Radiography with approximately equal balance of theory and practical sessions. As well as working through their own supervised practical exercises, students will receive full instruction on darkroom procedures and radiographic interpretation. The courses satisfies the training hours needed for Level II certification in accordance with SNT-TC-1A, for employer intended to qualify and certify their personnel according to their own specific written practice, adjustments shall be made after this initial course has been completed without any additional charge. 

PROGRAM HIGHLIGHTS:

  • Theory of Matter 
  • Radiation Theory/ Radioactive Isotopes 
  • Interaction With Matter 
  • Radiographic Film/Film Processing 
  • Radiographic Sensitivity and Image Quality Indicators 
  • Exposure Calculations 
  • Radiographic Quality 
  • Codes/ Specification Requirements 
  • Interpretation of Weld Radiographs 
  • Acceptance Criteria 
  • Film Processing 
  • Radiation/Nuclear Reactions 
  • Measurement of Radiation Dose 
  • Radiation Detection and Hazards 
  • Handling of Controlled Material 
  • X and Gamma Radiation 
  • Geometry of Image Formation 
  • Scattered Radiation 
  • Contrast Latitude
  • Radiographic Screens 
  • Film Processing 
  • Review and Final Course Examination 

PREQUISITES & COMMENTS: 
This course is an advanced program, intended for persons who have sufficient background and experience. 
Class size is limited for maximum utilization of instructor and equipment. 
Presentation of the course on-site is quoted separately.

Course Name : Radiographic Testing 
Level : Level II 
Duration (days) : 10

 

Price

Rp 

Duration

 

Schedule 2016

Period August - December

Quota

 

 

 

Download Brochure 

              

Registration

RADIOGRAPHY INTERPRETER (RI LEV 2)

This course will provide the theoretical and practical knowledge required for sound decision-making when interpreting radiographs against applicable codes and standards.

Radiography examination processing is covered as well as all of the varying parameters that contribute to the final radiographic image. 

PROGRAM HIGHLIGHTS:

  • Variables Related to Film Interpretation 
  • Film Density 
  • Discontinuities in Welds 
  • Radiation Hazards 
  • Measurement of Radiation Dose 
  • Radiation Health Problem & Personnel Monitoring 
  • Radiation Detection 
  • Handling of Controlled Material 
  • X and Gamma Radiation 
  • Geometry of Image Formation
  • Scattered Radiation 
  • Contrast / Latitude 
  • Radiographic Screens 
  • Film Processing 
  • Image Quality Indicators


PREQUISITES & COMMENTS: 
Class size is limited for maximum utilization of instructor and equipment. 
Presentation of the course on-site is quoted separately.

Course Name : Radiography Film Interpretation 
Level : Radiography Interpreter 
Duration (days) : 6

Price Rp 
Duration 6  days
Schedule 2016

Period August - December

 

Jakarta : -

Batam  : -

Quota Minimum 10
   
Download Brochure   
 

Registration

ULTRASONIC TESTING

The course is applications oriented for weld inspection, angle beam testing and defect evaluations are covered in detail. The course exceed the training hours needed for level II certification in accordance with SNT-TC-1A, for employer intended to qualify and certify their personnel according to their own specific written practice, adjustment shall be made after this initial course has been completed without any additional charge. 
PROGRAM HIGHLIGHTS:

  • Introduction (Advantages and Limitations, Applications Overview, History, Comparison, Math/Calculator Review) 
  • Basic Sonic (Velocity, Frequency, Wavelength) 
  • Generation of Sound 
  • Transducers 
  • Wave Mode 
  • Test Technique Variables 
  • Ultrasonic Instrument Operation 
  • Thickness / Distance Measurement 
  • Flaw Detection and Evaluation 
  • Introduction to Angle Beam Testing (IIW Block Setup, Flaw Location) 
  • Review of Ultrasonic Principles (Equipment, Techniques, Calibration) Evaluation of Weldments 
  • Weld Inspection 
  • Discontinuity Detection 
  • Comparison Procedures 
  • Review and Final Course Examination 


PREQUISITES & COMMENTS:
This course is an advanced program, intended for persons who have sufficient background and experience. 
Class size is limited for maximum utilization of instructor and equipment. Each candidate is required to bring their own Ultrasonic Flaw Detector. 
Presentation of the course on-site is quoted separately.

Course Name : Ultrasonic Testing 
Level : Level II 
Duration (days) : 14

 

Price Rp 
Duration  
Schedule 2016

Period August - December

 

Jakarta : -

BAtam  : -

Quota  
   
Download Brochure   
 
 

MAGNETIC TESTING

The course is designed for manufacturers, services companies, and overhaul facilities, which require their personnel to be trained in Magnetic Particle Testing, used to locate inherent, processing or service discontinuities in ferrous materials. In addition to cover the theoretical aspects of this method, the course provides demonstrations and practical hands–on laboratory time on portable equipment. The course meets the training hours needed for level II certification in accordance with SNT-TC-1A, for employer intended to qualify and certify their personnel according to
made after this initial course has been completed without any additional charge. 

PROGRAM HIGHLIGHTS:

  • Introduction (History, Purpose & Advantages ) 
  • Magnetic Particle Testing Principles 
  • Magnetic Fields in Various Magnets 
  • Magnetization Techniques/Procedures 
  • Selection of Proper Current 
  • Factors in Selecting the Proper Technique 
  • Particles and Demagnetization 
  • Test Equipment and Accessories 
  • Types and Origin of Discontinuities with MT 
  • Interpretation of MT Indications 
  • Controlling Variables 
  • Reporting/Process Controls 
  • Practical lab Sessions 
  • Review and Final Course Examination 


PREQUISITES & COMMENTS:
This course is basic programs for persons with little or no technical background. Class size is limited for maximum utilization of instructor and equipment. Presentation of the course on-site is quoted separately.

Course Name : Magnetic Particle Testing 
Level : Level II 
Duration (days) : 6

 

Price Rp 3.500.000
Duration 5 days
Schedule 2016

Period August - December

Jakarta:

Batam  : 

Duri      : 

Quota Minimum  
   
Download Brochure   
 

PENETRANT TESTING

The course is designed for manufacturers, services companies, and overhaul facilities, which require their personnel to be trained in Penetrant Testing, used to locate inherent, processing or service discontinuities in nonporous materials. The course meets the training hours needed for level II certification in accordance with SNT-TC-1A, for employer intended to qualify and certify their personnel according to their own specific written practice, adjustments shall be made after this initial course has been competed without any additional charge. 

PROGRAM HIGHLIGHTS:

  • Introduction (History, Purpose, Types, Advantages/ Limitations ) 
  • Penetrant Testing Principles 
  • Penetrant Processing 
  • Penetrant test variables 
  • Penetrant materials 
  • Selection of Penetrant test techniques/equipment 
  • Penetrant Processes/Indications Reporting 
  • Process Demonstration 
  • Review and Final Course Examination 


PREQUISITES & COMMENTS:
This course is basic programs for persons with little or no technical background. 
Class size is limited for maximum utilization of instructor and equipment. 
Presentation of the course on-sites is quoted separately.

Course Name : Penetrant Testing 
Level : Level II 
Duration (days) : 4

 

Price Rp 
Duration 5 days
Schedule 2016

Period August - December

Jakarta :-

Batam  : -

Duri      : -

Quota Minimum 10
   
Download Brochure   
 

PCN CERTIFIED

RADIOGRAPHY INTERPRETER (R1)

COUURSE DESCRIPTIONS

This is a course suitable for all who require an in-depth knowledge of the radiographic interpretation of welds.

The course concentrates on the identification of weld defects, assessment of radiographic quality and sentencing to example specifications.

OBJECTIVES:

  • To list radiographic techniques
  • To state origins of defects
  • To recognize and differentiate between film faults and defect indications
  • To interpret radiographs
  • To meet the syllabus for PCN Level 2

COURSE CONTENTS

  • Properties and production of X and gamma rays 
  • The formation of a latent image 
  • Radiographic film 
  • Development/processing 
  • Practical exercises cover
  • Identification of weld types 
  • Identification of weld defects 
  • Assessment and measurement of 
  • radiographic quality 
  • Sentencing to specifications 
  • Image quality 
  • Radiographic techniques 
  • Weld technology 
  • Interpretation of radiographs 
  • Specifications

 

COURSERECOGNITION
This course has been submitted and gained approved status for PCN certification pre-approval training. This approval is gained via the BINDT .This course is recommended by Agfa, validated by BINDT and recognized by PCN. This course is recommended by Agfa, validated by BINDT and recognized by PCN.

 

DURATION & LOCATION

#  5 days Course 

#  1 day Exam

 

 

Price USD 1,450 + Exam
Duration
6 days
Schedule 2016

Period August - December

Jakarta : -

Batam   : -

 

 

Quota Minimum  
   
Download Brochure   
 

ULTRASONIC TESTING

COURSE DESCRIPTIONS

A course for those who already have a basic understanding of the techniques of ultrasonic inspection and are wanting intensive instruction to improve their knowledge and increase their experience. The course is suitable for candidates who are wishing to progress towards any of the examination qualifications. The course has a high practical content; all equipment is provided.

 

CONTENTS

  • Basic techniques 
  • Probe identification 
  • Test sensitivity 
  • Equipment checks 
  • Geometry/ultrasonic technique selection 
  • Defect response 
  • Practical exercises on a wide variety of weldments 
  • Defect sizing methods.

 

PRE-REQUISITES FOR ATTENDING THIS COURSE

At least a basic understanding of ultrasonic techniques and a  knowledge of the controls on an ultrasonic test unit. If attempting a PCN examination the requirements of PCN/GEN must be met.

COURSE RECOGNITION
This course has been submitted and gained approved status for PCN certification pre-approval training. This approval is gained via the BINDT Accreditation/Validation course route.

 

DURATION 

14 days

Duration:

# 10 days course

#   4 days  exam

 

Price USD 1,950 + Exam
Duration  
Schedule 2016

Period August - December

 

Jakarta :-

BAtam  :-

Quota  
   
Download Brochure   
 

MAGNETIC TESTING (MT)

COURSE DESCRIPTIONS

This course provides detailed theoretical and practical information on all the commonly encountered Magnetic Particle Testing techniques. Candidates will have the opportunity to use the various techniques on welds, castings and wrought products.This course is suitable for beginners and personnel with an existing NDT knowledge.


SUITABLE FOR

All NDT personnel, inspectors and technicians engaged in, or responsible for, inspection of castings, forgings or fabricated items during manufacture or in-service.

OBJECTIVE

  • to explain the basic principles of magnetic particle inspection methods 
  • to carry out magnetic particle inspection 
  • to write clear and concise inspection instructions and test reports 
  • to meet syllabus requirements PCN Level 2 

Content

  • Properties of magnetic fields 
  • Principles of magnetic particle 
  • inspection 
  • Magnetic particle inspection equipment 
  • Equipment calibration 
  • Defect detection and evaluation 
  • Magnetic particle inspection techniques 
  • Relevant standards 
  • PCN documentation 
  • Extensive hands-on practical element

 

COURSE RECOGNITION

This course has been submitted and gained approved status for PCN certification pre-approval training. This approval is gained via the BINDT Accreditation/Validation course route.

DURATION & LOCATION

5 days

Duration:

# 4 days course

# 1 day   exam

 

Price USD 1,050 + Exam
Duration 5 days
Schedule 2016

Period August - December

Jakarta : -

Batam  : -

Quaota Minimum  
   
Download Brochure   
 

PENETRATE TESTING

COURSE DESCRIPTIONS

This course provides detailed  theoretical and practical information on all the commonly encountered Penetrant Testing techniques. Candidates will have the opportunity to use the various techniques on welds, castings and wrought products.

SUITABLE FOR

All NDT personnel, inspectors and technicians engaged in, or responsible for, inspection of castings, forgings or fabricated items during manufacture or in-service.

OBJECTIVE

  • to explain the basic principles of penetrant inspection methods 
  • to carry out penetrant inspection using solvent-removable, water-washable and post- emulsifiable /removal processes 
  • to write clear and concise inspection instructions and test reports 

Content

§  Introduction to the penetrant method

§  Principles of penetrant inspection

§  Penetrant inspection equipment

§  Performance checking

§  Defect detection and evaluation

§  Penetrant techniques

§  Relevant standards

§  PCN documentation

§  Extensive hands-on practical element

 

COURSERECOGNITION
This course has been submitted and gained approved status for PCN certification pre-approval training. This approval is gained via the BINDT Accreditation/Validation course route.

 

DURATION & LOCATION

 

5 days

Duration:

# 4 days course

# 1 day   exam

 

Price USD 1,050 + Exam
Duration 5 days
Schedule 2016

Period August - December

Jakarta : -

Batam  : -

Quota Minimum 10
   
Download Brochure   
 

 

 

Reach Us :

021-80898561
Call Center : 0813 7273 1362
021-80898561
training@oilinstitut.com
Oilinstitut.com

Chat with Us :